C3 component car speaker system with DMA-optimized woofers, pure silk dome tweeters, flexible installations, and a 1-year warranty.
General |
|
| Warranty | 1 year |
|---|---|
| Sizes | 1″/5 x 7″/5.25″/6″/6.5″ |
| Continuous power handling (RMS) | 75 W |
| Sensitivity (SPL @ 1 W/1 m) | 90 dB 6″: 89.5 dB |
| Frequency response (+/- 3 dB) | 5.25″/5 x 7″/6.5″: 48 Hz-25 KHz ± 3 dB 6″: 48 Hz-25 KHz 1″: 4 kHz-25 KHz |
| Nominal impedance | 4 Ω |
| Recommended amplifier power (RMS) | 25-150 W/Channel |
| Voice coil diameter | 1.2″ (30 mm) |
| Cone material | Mineral-filled polypropylene |
| Tweeter type | Silk Dome |
| Tweeter size | 1″ (25 mm) |
| Grille(s) included | yes (5 x 7″: no) |
Networking & Connections |
|
| Speaker connections | Spade connectors |
|---|---|
Mounting Dimensions |
|
| Frame outer diameter | 5.25″: 5.80″ (147 mm) 5 x 7″: 5.52 x 7.68″ (140 x 195 mm) 6″: 6.21″ (157.7 mm) 6.5″: 6.5″ (165 mm) |
|---|---|
| Mounting depth clearance | 5.25″: 2.27″ (58 mm) 5 x 7″: 2.52″ (64 mm) 6″: 2.49″ (63 mm) 6.5″: 2.55″ (65 mm) |
| Frontal grille protrusion | 5.25″: 1″ (25 mm) 6″/6.5″: 1.03″ (26.2 mm) |
| Mounting hole | 5.25″: 4.56″ (116 mm) 6″: 5″ (127 mm) 6.5″: 5.56″ (141 mm) |
| Grille tray outer diameter | 5.25″: 6″ (152 mm) 6″: 6.46″ (164.1 mm) 6.5″: 6.74″ (171 mm) |
| Motor outer diameter | 4.08″ (104 mm) 5.25″: 3.38″ (86 mm) |
| Frontal coaxial tweeter protrusion (frontal grille protrusion measured from mounting surface) | 5.25″: 0.69″ (18 mm) 5 x 7″: 0.78″ (20 mm) 6″: 0.81″ (20.6 mm) 6.5″: 0.75″ (19 mm) |
Tweeter Specifications |
|
| Flush mount fixture diameter | 2.12″ (54 mm) |
|---|---|
| Surface mount fixture diameter | 1.9″ (49 mm) |
| Flush mount mounting hole diameter | 1.875″ (48 mm) |
| Flush mount mounting depth | 0.71″ (18 mm) |
| Flush mount tweeter frontal protrusion | 0.32″ (8 mm) |
| Surface mount tweeter frontal protrusion | 0.95″ (24 mm) |
Crossover Specifications |
|
| Width | 3.36″ (85 mm) |
|---|---|
| Height | 1.44″ (37 mm) |
| Depth | 4.72″ (120 mm) |
